Wireless Telemetry Archives

How to get strain gauge readings instantly to your phone or tablet

4 March, 202026 May, 2020
by Wendy Jeffery

With the new B24-SSB Bluetooth strain transmitter, you can have instant wireless Bluetooth signal from your strain gauge sensor sent directly to your mobile phone or tablet.

Its fantastic benefits include:

Instant Bluetooth Readings using BLE
Wide Input Sensitivity Range: +/-6mV/V, +/-12 mV/V, +/-24 mV/V, +/-48mV/V
Transmission Range up to 90m
Transmit up to 12 Receivers With 1 Device
IP67 Immersion Protected Enclosure or OEM Board Only Versions
High Measurement Resolution – 5 Settings Available
FREE iOS & Android App with Advanced PIN Protection

13 Reasons to Use This ATEX Approved Telemetry for Your Strain Gauge Sensor

28 May, 20195 October, 2021
by Wendy Jeffery

Reduce the dangers in hazardous areas by using the new X24 wireless ATEX & IECEx approved instrumentation.

Exceptional Reliable Wireless Signal in Hazardous Environments
Intrinsically Safe Equipment with the Latest CSA Certification
Ideal for Petrochemical, Industrial Processing and Oil & Gas Industries
Superior Accuracy Thanks to its 9 Point Linearisation
Up to 1/2 a Mile Wireless Range!
Long Battery Life up to 5 Years
OEM options to Fit Inside Sensors

Get Instant Printed Reports from Your Microtronics Blueforce Tester

20 October, 201623 June, 2022
by Wendy Jeffery

Saves You Time – Prints Instant Reports using Bluetooth
Portable – Only 150g in Weight
Easy to Carry to the Test Site – No PC Required
Prints Fast at 90mm per Second
No Need to Wait for a Printed Report to be Posted
Li-Ion Battery Power Source with Battery Charger Included.
Get it Quick – 2 Week Delivery

Why it is Vital to Re-Calibrate Your Gate Impact Force Tester

14 October, 20155 October, 2021
by Wendy Jeffery

A poorly maintained power gate can lead to serious accidents due to inadequate installation and care. Can you afford not to get your gate impact force tester re-calibrated?

Get the Revolutionary Upgrade ‘SMART’ for Your BlueForce/SpeedForce Now, Exclusively from Applied Measurements

9 September, 201510 January, 2024
by Wendy Jeffery

We are the only UK company able to offer you the “UPGRADE SMART” hardware and software upgrade for your existing BlueForce/SpeedForce gate force tester. This will give you instant display of the test results to view on your smartphone, tablet or PC (models with built in USB port only).

ET24 Telemetry Lift Link Load Cell Offers Flexibility in Lifting Load Monitoring

7 August, 20147 August, 2020
by Wendy Jeffery

Introducing the new ET24 In-Line Telemetry Lift Link Load Cell… More Accurate: ±0.3% of reading More Adaptable: Wireless monitoring from multiple locations and load cells More Available: 3-4 days delivery time Cutting Edge Power Management System The new ET24 telemetry lift link load cell’s contemporary power management means transmission distances in excess of 200 metres are achievable in open-field situations, avoiding the expense and problematic use of cabling. The telemetry lift link’s batteries will last for more than 600 hours with the batteries in the handheld display lasting up to 40. There’s no need to worry about finding special batteries either as both the load cell and display use any standard AA alkaline type. The antenna is internal so there’s no […]

New USB T24 Telemetry Base Station Released

27 June, 201315 January, 2018
by Ollie

The T24 wireless telemetry aquisition range has expanded its portfolio of products with a new USB telemetry base station. The new T24-BSue compact USB telemetry base station sits between the miniature T24-BSu telemetry base station and the fully-featured T24-BSi industrial telemetry base station and offers an ideal mix of compact dimensions and an extended range of 200 metres. The T24-BSue’s IP65-rated (weatherproof) enclosure, shared with the T24-ACMi acquisition module, measures just 59 x 76.6 x 29mm and is manufactured in tough plastic providing excellent environmental protection whether the device is being used indoors or outside exposed to the elements. The new USB base station is fully compatible with the complete range of T24 wireless telemetry acquisition modules which includes models […]

Force Measurement Determines The Effect of Girth Tension on Horse Gait

7 January, 201113 May, 2021
by Ollie

Using electrical systems for the measurement of mechanical forces is by no means limited to machines and laboratory based applications. In her recently completed research thesis ‘Girth Tensions and their Effects on Equine Stride Characteristics’, Sue Wright of Moulton College Northampton used load cells, motion sensors and GPS amongst other technologies to measure and record the tension within the girth strap used to hold the saddle in place.

Category: Wireless Telemetry

How to get strain gauge readings instantly to your phone or tablet

13 Reasons to Use This ATEX Approved Telemetry for Your Strain Gauge Sensor

Get Instant Printed Reports from Your Microtronics Blueforce Tester

Why it is Vital to Re-Calibrate Your Gate Impact Force Tester

Get the Revolutionary Upgrade ‘SMART’ for Your BlueForce/SpeedForce Now, Exclusively from Applied Measurements

ET24 Telemetry Lift Link Load Cell Offers Flexibility in Lifting Load Monitoring

New USB T24 Telemetry Base Station Released

Force Measurement Determines The Effect of Girth Tension on Horse Gait

Quick Enquiry