A multi-channel system was set up using two ET24-5T and two ET24-12T telemetry lift link load cells, two inclinometers (angle sensors) and a T24-BSu base station. ET24 telemetry load cells were attached to each corner of the bus to monitor the load and the two inclinometers were used to measure the incline. Once the bus was lifted, instantaneous measurements were picked-up by a T24-BSu wireless telemetry base station and the data was transmitted straight to the PC or laptop.
Category: Weighing
ET24 Telemetry Lift Link Load Cell Offers Flexibility in Lifting Load Monitoring
Introducing the new ET24 In-Line Telemetry Lift Link Load Cell… More Accurate: ±0.3% of reading More Adaptable: Wireless monitoring from multiple locations and load cells More Available: 3-4 days delivery time Cutting Edge Power Management System The new ET24 telemetry lift link load cell’s contemporary power management means transmission distances in excess of 200 metres are achievable in open-field situations, avoiding the expense and problematic use of cabling. The telemetry lift link’s batteries will last for more than 600 hours with the batteries in the handheld display lasting up to 40. There’s no need to worry about finding special batteries either as both the load cell and display use any standard AA alkaline type. The antenna is internal so there’s no […]
Applied Measurements Builds Weighing System for Packaged Biomass Plantrooms
The weighing systems comprise of between 6 and 8 silo mount-style load cell weighing assemblies depending on the size of the plant, all of which are then wired into a bespoke junction box. The signal from the junction box feeds into an Intuitive2-L panel mounted digital display that provides a local weight reading in the biomass plantroom.
Batch Weighing System Controlled Through Touchscreen Technology
Applied Measurements Ltd was asked to design a batch weighing system where the ingredients of each batch would constantly vary. To weigh the batches into the barrels AML built a stainless steel weighing platform incorporating load cells to the specific size required by the customer. As the barrels could be dropped on to the weighing platform, positive overload stops were included to protect the load cells. The output signal from the weighing platform is fed into a digital display, which has two set point relays. Connected to the digital there is also a touch screen display, this enables the operator to see the live reading, the batch reading, the total batches and a numeric keypad to input the individual batch […]
Compact Under-Hook/Lifting Gear Telemetry Load Cell & Display
The latest weighing system from Applied Measurements Ltd is one of the first of its kind to use a telemetry link between the load cell and the portable digital display instrument, thus eliminating the problems associated with a long interconnecting cable. Specifically designed for the measurement of cable tension and under hook crane and lifting gear weighing, the complete ET Telemetry Lift Link system consists of a robust telemetry load cell with an internal data transmitter with a range of 200 metres, together with a portable handheld receiver instrument, displaying the weight digitally. The ET telemetry load cell is available in ten different ranges from 0-1 to 0-500 tonnes and offers excellent performance with a repeatability of <0.05% of rated […]
