FUSION blends high precision and stability into a simple to use, smartly-styled large digital display. It boasts an impressive 8 digit numerical display and 6 digit clock format both of which can be viewed from up to 200 metres away!
Category: Instrumentation
New Case Same High Speed Strain Gauge Amplifier
We’ve given our high speed, highly stable SGA strain gauge amplifier a fantastic new and improved enclosure.
This will give you:
- Quick release screw fittings.
- Very robust casing to IP65 protection rating, maintaining
the excellent reliability and quality of the previous design. - Same mounting hole sizes and centres – enabling you to replace the old enclosure
with the new, easily and simply without any modification to existing fixings.
Telemetry Lift Link Load Cells Tip the Scales for Plaxton Bus
A multi-channel system was set up using two ET24-5T and two ET24-12T telemetry lift link load cells, two inclinometers (angle sensors) and a T24-BSu base station. ET24 telemetry load cells were attached to each corner of the bus to monitor the load and the two inclinometers were used to measure the incline. Once the bus was lifted, instantaneous measurements were picked-up by a T24-BSu wireless telemetry base station and the data was transmitted straight to the PC or laptop.
DSC-USB Digitiser Connects Strain Gauge Sensors to Your PC Quickly and Easily
Want an easy and cost effective way to convert a transducer signal to a digital input for your PC? Try Applied Measurements’ compact DSC-USB strain gauge digitiser. This compact digital signal conditioner delivers high performance and high accuracy measurement readings from any full-bridge strain gauge sensor direct to your PC, via your USB port. Using the free DSC toolkit software means you can view the readings immediately on your PC and interpret the data instantly, with no need for additional amplifiers. With its USB connectivity, the DSC-USB can provide high stability readings direct to your computer and as the DSC-USB is available ex-stock for £249, it can be delivered without delay, enquire today. The device is powered by the USB port […]
New USB T24 Telemetry Base Station Released
The T24 wireless telemetry aquisition range has expanded its portfolio of products with a new USB telemetry base station. The new T24-BSue compact USB telemetry base station sits between the miniature T24-BSu telemetry base station and the fully-featured T24-BSi industrial telemetry base station and offers an ideal mix of compact dimensions and an extended range of 200 metres. The T24-BSue’s IP65-rated (weatherproof) enclosure, shared with the T24-ACMi acquisition module, measures just 59 x 76.6 x 29mm and is manufactured in tough plastic providing excellent environmental protection whether the device is being used indoors or outside exposed to the elements. The new USB base station is fully compatible with the complete range of T24 wireless telemetry acquisition modules which includes models […]
Sensor-to-PC Connection Made Easy with DSC-USB Strain Gauge Digitiser
What is a DSC-USB? The DSC-USB strain gauge digitiser is the easiest and most cost effective way of converting a transducer signal into a digital input ready for connection to your PC using a spare USB port for live monitoring and logging of data. The DSC-USB will work with any full-bridge strain gauge sensor and can also be modified to work with 0-5Vdc signals from other sensors such as LVDTs, displacement sensors, pressure transducers and torque transducers. The USB port powers the transducer and the digitiser so no external power supplies are required unless you are using a non-strain gauge sensor (0-5Vdc input). To complement the DSC-USB is a free piece of software, the DSC Toolkit. The Toolkit allows you to […]
Load Pins and Position Sensors used for Antarctic Research
Applied Measurements needed to design and manufacture a pair of custom load pins for the university that could compensate for temperatures as low as -30degC. The load pin also had a built in ICA4S amplifier that could give a 4-20mA output for them to use to monitor the drilling forces.
Applied Measurements Builds Weighing System for Packaged Biomass Plantrooms
The weighing systems comprise of between 6 and 8 silo mount-style load cell weighing assemblies depending on the size of the plant, all of which are then wired into a bespoke junction box. The signal from the junction box feeds into an Intuitive2-L panel mounted digital display that provides a local weight reading in the biomass plantroom.
