Subsea Pressure Sensor | Pa600SS

At a Glance

Description

Our Applied Measurements Pa600SS subsea pressure sensor series are ideal for the measurement of gas and liquid pressure in subsea and offshore applications.  They have a submersible IP68 protection rating for depths of up to 3000m (300bar external pressure) and a UNS S31803 Duplex stainless steel construction as standard.  Greater depths ratings to 8000m/800bar are also available on request.

Thanks to their wet-mateable 3-pin or 4-pin subsea connector type electrical connection, integrity at 3000m depths/300bar is guaranteed.  Plus, along with their ±0.25% of full-scale accuracy as standard, precision and optimum performance is ensured.  If your application requires even further accuracy, we can also provide a 0.1% optional version.

Viton O-ring, Duplex stainless steel case, ceramic diaphragm (96% aluminium oxide Al2O3) and a G¼ inch male process connection come as standard with the Pa600SS subsea pressure sensor.  Plus, Applied Measurements can provide alternate case, O-ring material and process connections to suit your requirement.  We can also provide improved thermal zero stability of <±0.02% or <±0.01%/Span/˚C.

The Pa600SS subsea series provides a wide choice of electrical outputs from its ASIC-based amplifier circuit, these include 4-20mA, 0-5Vdc, 0-10Vdc, 10mV/V and 20mV/V, as well as a ratiometric 0.5-4.5Vdc (10% to 90% of supply voltage) signal that requires a 5Vdc (2.7 – 5.5Vdc acceptable) to suit most dataloggers.

The Pa600SS subsea pressure sensor series can also be supplied with any of our wide range of instrumentation to give you a complete calibrated system.

Technical Specifications

Nominal Pressure Range	Bar (sealed gauge or absolute)	0-1	0-2	0-5	0-10	0-20	0-50	0-100	0-200	0-400	0-600	0-700
Compound Ranges	Bar	-1…0 *	-1…+2 *	-1…+5	-1…+9	-1...+19	-1...+29	-	-	-	-	-
Permissible Overpressure	Bar	2	4	10	15	35	100	150	350	500	800	900
Burst Pressure	Bar	3	6	15	25	65	120	200	500	650	950	950
*<±0.1% / FS (BFSL) accuracy not possible in this range

Output Signal & Supply Voltage	Wiring System	Output	Supply Voltage	Input Current	Input Resistance	Output Resistance
Pa642SS	2 - wire	4 – 20 mA	9 – 32 Vdc	n/a	<500	<500
Pa605SS	3 - wire	0 – 5V dc	9 – 32 Vdc	<10 mA	<500	<500
Pa6010SS	3 - wire	0 – 10V dc	13 – 32 Vdc	<10 mA	<500	<500
Pa645SS	3 - wire	0.5 to 4.5V dc	5 Vdc (2.7 - 5.5Vdc)	<3 mA	<500	<500
Pa602SS	4 - wire	Passive mV/V (un-rationalised)	2 – 30 Vdc	<1 mA @ 10V	<11000	<11000
Pa607SS	4 - wire	2mV/V (rationalised)	2 – 30 Vdc	<1 mA @ 10V	<11000	<11000
Pa610SS	4 - wire	10mV/V (amplified)	3 – 12 Vdc	<3 mA typ.	<11000	<2000 nom.
Pa620SS	4 - wire	20mV/V (amplified)	3 – 12 Vdc	<3 mA typ.	<11000	<2000 nom.

Performance
Accuracy (non-linearity, hysteresis, repeatability)	% Full Scale Output	<±0.25 (BFSL) <±0.1 (BFSL) optional
Zero Balance	±% of Rated Output	<1.0
Setting Errors (offsets)	2-wire, 3-wire 4-wire rationalised 4-wire un-rationalised	Zero & Full Scale, <±0.5% / FS Zero <0.2mV/V, span ±1% Zero N/A, Span ±30%
Permissible Load	2-wire 3-wire 4-wire	Rmax = [(VS – VS min) / 0.02] Ω Rmin = 10 k Ω Rmin = 11 k Ω
Influence Effects	Supply Effects Load Effect	mV/V & 0.5 to 4.5V – Ratiometric, Other Voltage Outputs - <0.005 % FS / 1V 4-20mA = <0.05 % FSO / kΩ
Response Time (10% - 90%)	ms	≤1 (mV/V versions) ≤10 (amplified versions)
Warm-Up Time (amplified versions only)	ms	2 typ.

Permissible Temperatures & Thermal Effects
Media Temperature	˚C	-20 to +135 (non-freezing media only)
Ambient Temperature	˚C	-4 to +60
Storage Temperature	˚C	-20 to +60
Compensated Temperature Range	˚C	+20 to +60
Thermal Zero Shift (TZS)	% / FS / ˚C	<±0.04 (standard) <±0.02 (option) <±0.01 (option)
Thermal Span Shift (TSS)	% output / ˚C	<±0.015 typical

Electrical Protection
Reverse Polarity Protection		No damage but also no function
Electromagnetic Compatibility		CE Compliant
Insulation Resistance	Megohms Ω at 50V dc	>500

Mechanical Stability
Shock	100 g / 11 ms
Vibration	10 g RMS (20 ... 2000 Hz)

Materials
Housing & process connection	UNS S31803 Duplex Stainless Steel CA104 Marine Bronze or Titanium (optional)
Process Connection ‘O’ ring seal	FKM/Viton NBR/Nitrile (optional) EPDM (optional) FFKM / Chemraz (optional)
Housing 'O' ring seals	FKM/Viton + NBR/Nitrile
Diaphragm	Ceramic Al2O3 96 %
Media wetted parts	Housing and process connection, ‘O’ ring seal, diaphragm

Misc
Weight	grams	150 nominal
Installation position		Any
Operational life	pressure cycles	> 100 x 106
Environmental Protection		IP68 to 3000m/300bar
Subsea Connector Type	SubConn® Circular Series Bulkhead	3-Pin Male (2-wire sensors) / 4-Pin Male (3-wire & 4-wire sensors)

Product Dimensions

All dimensions are in mm

Wiring Details

		Subsea Connector
2 - wire	+ve Supply -ve Supply Ground	Pin 1 Pin 2 Pin 3
3 - wire	+ve Supply -ve Supply +ve Output Ground	Pin 1 Pin 2 Pin 3 Pin 4
4 - wire	+ve Supply -ve Supply +ve Output -ve Output	Pin 1 Pin 2 Pin 3 Pin 4

Ordering Codes & Options

Pa642SS-10barsg-A4AV-00-000	Pa6	42	SS	-	10barsg	-	A	4	A	V	-	00	-	000
Product Family
Pa6	Pa6
Electrical Output
02 = mV/V un-rationalised		02
07 = 2mV/V		07
10 = 10mV/V		10
20 = 20mV/V		20
42 = 4-20mA (2-wire)		42
45 = 0.5-4.5Vdc ratiometric (5V excitation)		45
05 = 0-5Vdc		05
010 = 0-10Vdc		010
Electrical Connection
SS = Subsea Connector			SS
Pressure Range
10barsg = 0 to 10bar sealed gauge				-	10barsg
M1P1barsg = -1 to +1bar sealed gauge				-	M1P1barsg
5bara = 0 to 5bar absolute				-	5bara
2400psisg = 0 to 2400psi sealed gauge				-	2400psisg
Accuracy (Non-Linearity & Hysteresis)
A = <±0.25%/FS (standard)						-	A
B = <±0.1%/FS						-	B
Zero Temperature Compensation (TZS)
4 = <±0.04%/FS/ºC								4
2 = <±0.02%/FS/ºC								2
1 = <±0.01%/FS/ºC								1
Process Connection
A = G¼” Male DIN 3852 in UNS S31803 Duplex St/Steel									A
B = G¼” Male DIN 3852 in CA104 Marine Bronze									B
C = G¼” Male DIN 3852 in Titanium Alloy									C
D = ¼" NPT Male in UNS S31803 Duplex St/Steel									D
E = G¼" Male DIN 3852 in 316L St/Steel									E
F = G¼" Male DIN 3852 in Monel									F
O-Ring Material
V = Viton (FKM)										V
N = Nitrile (NBR)										N
E = EPDM (Ethylene Propylene Diene Monomer)										E
C = Chemraz (Perfluoroelastomer/FFKM)										C
Mating Cable Assembly Length (in metres with flying leads at free end)
00 = No Mating Assembly											-	00
01 = 1 metre											-	01
05 = 5 metres											-	05
Specials Code
000 = No Special Requirements													-	000