The BOSS series of bolt-on strain sensors from Applied Measurements provide a very cost effective solution for many high capacity weighing requirements such as on large tanks and silos, as well as finding application in overload protection systems on cranes, winches, lifts and presses. The sensors are designed to be attached directly to steel structures and are capable of detecting tensile, compressive and bending stresses. Utilizing the latest strain gauge technology, each sensor is manufactured from specifically selected high grade alloy steel with thermal coefficients of expansion matched to structural steel. Unlike some competitive units each sensor is temperature cycled and compensated to minimize the effects of temperature variation. For installation, each unit is supplied with a template to which the […]
Transducer News & Views | The Applied Measurements Blog
Batch Weighing System Controlled Through Touchscreen Technology
Applied Measurements Ltd was asked to design a batch weighing system where the ingredients of each batch would constantly vary. To weigh the batches into the barrels AML built a stainless steel weighing platform incorporating load cells to the specific size required by the customer. As the barrels could be dropped on to the weighing platform, positive overload stops were included to protect the load cells. The output signal from the weighing platform is fed into a digital display, which has two set point relays. Connected to the digital there is also a touch screen display, this enables the operator to see the live reading, the batch reading, the total batches and a numeric keypad to input the individual batch […]
Special Annular Load Cell Measures Tensioning System Spring Force
The overall tension in the system is controlled by a spring mechanism against an idler wheel. Some form of load measurement was required, but it had to fit into the existing system, which did not allow space for a standard off-the-shelf load cell. Applied Measurements Ltd designed and manufactured a custom load cell based on the CCG load cell concept, but to exactly fit the existing mechanical dimensions. It had to be annular to allow the tensioning system to fit through the centre and to be extremely low in height to replace an existing washer. To complete the system each load cell was supplied calibrated with a digital indicator containing 4 changeover relays. Each system operated from a 240Vac supply, […]
Hand Force Load Cell Enables Grip Measurement
The grip measurement application required the design of a custom built hand force load cell to enable the customer to determine the ratio between gripping force and friction coefficients of various materials. The length and overall diameter of the finished transducer were stipulated by the customer and it was important that the load cell could be gripped at any point along its length without compromising the sensitivity and accuracy. Successful grip measurement was achieved by utilising the basic single point load cell principles but adapting them to meet the dimension specifications. To enable transducer to be used in a variety of locations, it was calibrated to UKAS Standards with our portable battery powered PD100 Indicator. From the initial consultation through […]
UKAS Traceable Calibration of Load & Force to 1800kN Now Available
We have now completed the building of a new force and load calibration machine, capable of measuring up to 1800kN in compression and tension using a reference standard load cell traceable to the National Physical Laboratory. Our facilities now include the capability, with three separate test machines, plus dead weights to offer UKAS traceable calibration in tension and compression from 5N to 1800kN. We offer either a UKAS traceable calibration service or the equipment may be hired for customers wishing to carry out their own calibrations.
Custom Load Pins Designed To Suit Your Needs
The DBEP series load pins are available in a standard range of capacities and sizes to show the overall scope of this product. As the majority of applications require specific dimensions we can quickly and easily design and manufacture custom load pins to meet individual needs. This can be achieved without the normal high cost and long delivery associated with custom load pin manufacture. Options for our custom load pin designs include; load ratings from 0-500kg up to 0-1500 tonnes, sealed to IP68 or subsea, built in amplifiers (analogue or digital), bi-directional operation, dual strain gauge bridges, X-Y force measurement, temperature ranges from –20ºC to +70ºC, while Stainless Steel construction is standard. Our custom load pins can be supplied as […]
Three-in-One Pressure Sensor: Transmitter, Switch and Display
The latest product from Applied Measurements Ltd is the DS200 series offering an integrated combination of pressure transmitter / transducer, intelligent pressure switch and digital display. The DS200 covers ranges from 0-100mbar up to 0-600 bar with either a 4-20mA or 0-10Vdc output, with an overall accuracy of 0.25% of full scale. There are many options for both pressure connection and for electrical connection, with plug and socket (IP65) or cable (IP67) exits available. The display has 4 digit resolution with rotation on 2 axes, offering 240º on the front face and 300º from the transducer housing, thus enabling adjustment to its optimum viewing position. The unit comes standard with one set point with a second set point optional, each […]
Digiforce Strikes A Chord at Bison Concrete
Bison is the UK’s leading producer of structural, precast concrete products. Consistent, quality control is vital to maintain the company’s position at the forefront of the sector. Bison is particularly renowned for prestressed elements, including hollow-core floors, solid composite floors and beams. Integral to the durability and structural performance of these products is the correct tensioning of the prestressing steel tendons. There are approximately 30 tendons in the average 1200mm-wide hollow-core floor slab. These may be up to 160m in length. The tendon carrier precedes the casting hopper. It lifts the tendons to the required depth in the slab so that sufficient concrete cover is achieved during casting. The tensioning equipment must be tested on a regular basis, but current methods […]
