OEM Pressure Sensors

Precise, Reliable, One-Offs to High Volume - Made in the UK

Lead Time
Fast Scheduled Deliveries
Prices From
Speak to Sales
Accelerated delivery available
Quantity, OEM & educational discounts

At a Glance

  • Ranges: from 0-50mbar up to 0-700bar
    (Higher ranges on request)
  • Outputs: 4-20mA, 0-5Vdc, 0-10Vdc, 0.5-4.5Vdc ratiometric, mV/V
  • Housing Materials: PVDF, 303 Stainless Steel, 316 Stainless Steel, Duplex Stainless Steel, Marine Bronze, Titanium
  • Various Process Connections
  • Range of Back-End Connections
  • UK-Designed & UK-Manufactured
  • High Volume & One-Offs
  • Customer Specific Designs
  • Fast Scheduled Deliveries
  • Pressure Controllers for Accurate Testing and Calibration
  • Environmental Test Chambers for High Reliability


Applied measurements specialise in the design and manufacture of OEM pressure sensors. We can manufacture one-offs to high-volume amounts at a relatively low cost and fast scheduled deliveries.

Our OEM pressure sensors are being used to deliver reliable data in vigorous environments and challenging applications worldwide.

All our OEM pressure sensors are designed and manufactured here in the UK by our expert pressure team. Plus, we readily hold stock of component parts in the UK, which means a fast turnaround time for your OEM pressure sensors.

To ensure precision and high accuracy, we use environmental test chambers and automated pressure controllers to calibrate and test your pressure sensors.

Plus, all our equipment is traceable to national UKAS standards to guarantee high reliability and optimum performance.

We can offer superb media compatibility, high-temperature options and a wide range of process connections and mechanical connections, all to suit your specific OEM requirements.

In addition, we can deliver a selection of electrical outputs such as 4-20mA, 0-5Vdc, 0-10Vdc, 0.5-4.5Vdc ratiometric, and mV/V.

We are certain we can design, manufacture, and deliver OEM pressure sensors to suit you whatever your specifications.

Possible Configuration, Material, Electrical & Mechanical Options

Housing Material 
PVDF Polyvinylidene Fluoride ThermoplasticPVDF
303 Stainless Steel303SS
316 Stainless Steel316SS
UNS S31803 Duplex Stainless SteelUNS
CA104 Marine Bronze CA104
mV/V un-rationalised02
4-20mA (2-wire)42
0.5-4.5Vdc ratiometric (5V excitation)45
Electrical Connection / ATEX Certification
Mini DIN Plug & SocketP
IP65 Cable Gland + Screened, Un-Vented PVC CableC
M12x1 4-pin ConnectorM
M12x1 4-pin Connector + Mating HalfMM
6-pin Bayonet-Lock Mil-Spec ConnectorBL
6-pin Bayonet-Lock Mil-Spec Connector + Mating HalfBLM
SS = Subsea ConnectorSS
Pressure Range
0 to 50mbar gauge50mbarg
0 to 10bar gauge10barg
-1 to +1bar gaugeM1P1barg
0 to 14.5psi absolute14.5psia
0 to 5psi gauge5psig
Accuracy (Non-Linearity & Hysteresis)
<±0.25%/FS (standard)A
Zero Temperature Compensation (TZS)
Process Connection
G¼” Male DIN 3852 in 303 St/Steel A
G¼” Male DIN 3852 in 316L St/SteelB
¼” NPT Male in 303 St/SteelC
7/16 UNF-20 Male in 3030 St/SteelD
G¼” Female in 303 St/SteelE
G¼” Male DIN 3852 in PVDF (Polyvinylidene Fluoride)F
G¼” Male with 60° Internal Cone in 303 St/SteelG
G¼” Male DIN 3852 in UNS S31803 Duplex St/SteelI
G¼” Male DIN 3852 with Snubber in 303 St/SteelJ
¼” NPT Male in PVDF (Polyvinylidene Fluoride)K
M20 x 1.5 Male in 303 St/SteelL
G1/8" Male DIN 3852 in 303 St/SteelM
½" NPT Male in 303 St/SteelO
G¾" Male DIN 3852 with Semi-Flush Diaphragm in 303 St/SteelP
G½" Male DIN 3852 in 303 St/SteelR
9/16 UNF Internal (no bleed hole) in St/SteelS
O-Ring Material
Viton (FKM)V
Nitrile (NBR)N
EPDM (Ethylene Propylene Diene Monomer)E
Chemraz (Perfluoroelastomer)C
Cable Length (in metres)Various Lengths to Suit

Interested in this product? Send us an enquiry...

    Why Applied Measurements?

    • Suppliers of top quality strain gauge sensors and transducers to every corner of industry - UK and worldwide
    • Over 100 years of expert transducer knowledge
    • Our high quality products all come with a 3 year warranty