We are very excited to introduce the smart new domed-top version of our existing column load cell which replaces the 0.25% accuracy CCD model that featured a flat top.
We can now offer you lower capacity versions 0.5Nm, 1Nm and 2Nm giving you improved measurement accuracy in lower-torque applications such as small gearbox and low-power motor testing.
Designed to measure brake pedal force, the CCGBP brake pedal load cell is an essential tool to the automotive industry, testing the reliability of a vehicle’s braking system with ranges from 0-50kg up to 0-200kg. This highly versatile brake pedal load cell can also be used on other pedals within the vehicle.
Applied Measurements are proud to have been nominated for Best Automation Company of The Automation Inside Readers’ Choice Awards 2014, with our new ET24 telemetry lift link load cell chosen to run in the Best Sensor category. “We are delighted to have been nominated in not just 1 category but 2 categories of The Automation Inside Readers’ Choice Awards 2014” says Darren Skipp, Applied Measurements’ Commercial Director. “It proves that top quality products, hard work and customer commitment really do pay off”. We strongly believe that the ET24 telemetry load cell deserves this nomination thanks to its fantastic advantages: Superb Accuracy = ±0.3% of reading Transmission distances in excess of 200 metres Easy wireless monitoring from multiple locations and by […]
For weighing and force monitoring, Applied Measurements’ DSCC pancake load cells are the ideal choice. Here’s why….. Tension and Compression Capable Low Physical Height Complete Customisation Possible Resistant to Extraneous Forces High-Frequency Response Stainless Steel Construction The DSCC pancake load cell is designed for weighing and force monitoring alike and can operate in both tension and compression. Its low physical height lends it to applications where space is at a premium. What’s more, the DSCC pancake load cell can be entirely customised by our design team to suit your application, including the dimensions, centre thread sizes, higher capacities in excess of 3000kN and IP rating up to IP68 for submersible applications. The image above shows the recent customisation of the […]
Introducing the new ET24 In-Line Telemetry Lift Link Load Cell… More Accurate: ±0.3% of reading More Adaptable: Wireless monitoring from multiple locations and load cells More Available: 3-4 days delivery time Cutting Edge Power Management System The new ET24 telemetry lift link load cell’s contemporary power management means transmission distances in excess of 200 metres are achievable in open-field situations, avoiding the expense and problematic use of cabling. The telemetry lift link’s batteries will last for more than 600 hours with the batteries in the handheld display lasting up to 40. There’s no need to worry about finding special batteries either as both the load cell and display use any standard AA alkaline type. The antenna is internal so there’s no […]
Introducing the CCG family of annular load cells: Applied Measurements are proud to present the CCG family of annular load cells. These annular or donut load cells have been designed for the measurement of compressive forces, both continually and periodically, and are often used in critical bolted installations to monitor bolt tension. One major benefit is that the CCG annular load cells can be entirely customised to suit your specific application. The CCG annular load cell is flexible in: All dimensions – Fits into spaces which limit the use of other load cells. Our lowest height to date standing at a tiny 5mm tall! IP rating – IP66 as standard, can be enhanced to IP68 for submersible applications. Temperature range […]
|
|
