At a Glance
- Ø19.5mm x 7.6mm high
- 0-5Vdc, 0-10Vdc, 4-20mA, & ±10Vdc Output Versions
- Low Current Consumption
- Bandwidth: 1kHz max.
- Available with In-Line enclosure for mounting on transducer cable
- Ideal for when you want a Small Amplifier to Fit Inside Your Load Cell
- Compact at Only 19mm Diameter
- Can Fit Inside a Wide Variety of Strain Gauge Transducers
- 6 Different Outputs to Suit Your Exact Application
The ICA miniature load cell amplifier measures just 19mm in diameter and 7.6mm in height and is designed for incorporation into the body of a broad range of strain gauge transducers and load cells.
When space inside the load cell or transducer is restricted, the ICA miniature load cell amplifier can also be mounted in-line on the transducer cable inside a dedicated enclosure suitable for the application environment. We offer our own compact IP65-rated die cast enclosure the measures just 50mm x 45mm x 30mm which suits most general industrial applications (pictured right).
There are a total of six output variants of the miniature ICA load cell amplifier available:
- ICA1H: 0.1 to 10Vdc (13 to 30Vdc supply)
- ICA2H: 0.1 to 5Vdc (8.5 to 28Vdc supply)
- ICA3H: ±10Vdc (±13 to ±15Vdc bi-polar supply)
- ICA4H: 4-20mA (3-wire) (10 to 30Vdc supply)
- ICA5S: 4-20mA (2-wire) (7.5 to 30Vdc supply)
- ICA6H: ±10Vdc (24 to 30Vdc supply)
We hold stock of all the miniature load cell amplifier models mentioned above for immediate despatch. Request pricing.
Instant Price & Part Code Builder
Customise this product using the dropdown menus and find the price*, lead time and ordering code below.
*Please note: The prices shown are valid in the UK only and do not include carriage charges. For overseas pricing please contact a member of our sales team or your local distributor.
Real Life: Power Take-Off Torque Monitoring – Accurate, Fast and Simple!
Read the real life case study of power take-off torque monitoring on the Wave Energy Converter The SeaPower Platform. See how our complete torque measuring system enabled engineers to accurately monitor the torque applied by the Wave Energy Converter as it responded to waves in the test tank with accurate, fast and reliable results.
Submersible Load Cells Lower the Cost of Large Tidal Turbine Designs
This case study aims to significantly reduce the cost of large scale tidal turbine designs using our submersible load cells. The tidal turbine test rig was placed in a state-of-the-art test tank, where the team were able to increasing the size, flow rate and turbulence levels within the tank. Lowering the cost of rotor blade manufacture would make this renewable energy more economical to use and widely accessible, benefiting not only the UK renewable tidal energy markets but developing tidal energy countries too. Our submersible load cells measured both the torque and the thrust of the underwater tidal turbine design.
Our Shear Pin Load Cells and Draw Wire Sensors Deliver Flawless Results in Sub-Zero Temperatures
Applied Measurements were contacted by Victoria University of Wellington to provide reliable and accurate equipment that could operate in the sub-zero temperatures of the Antarctic. Using Applied Measurements’ two customised DBEP shear pin load cells, a WS12 draw wire sensor and four intuitive2 displays, the RICE team were able to successfully extract a 763m deep ice core from an ice cap on Roosevelt Island.
Applied Measurements’ Submersible Load Cells fitted to the World’s Largest All-Terrain Hexapod
Applied Measurements provided the load cells needed to monitor the force on individual legs to stop the Mantis (the world’s largest hydraulic hexapod robot) walking into a situation that is hazardous to its overall stability. Assisted by Applied Measurements’ compact and submersible DSCC load cells, the Mantis successfully travels over all slopes and uneven surfaces, traversing most types of terrain, even wading through water.
Load Pins and Position Sensors used for Antarctic Research
Applied Measurements needed to design and manufacture a pair of custom load pins for the university that could compensate for temperatures as low as -30degC. The load pin also had a built in ICA4S amplifier that could give a 4-20mA output for them to use to monitor the drilling forces.
Interested in this product? Send us an enquiry...
- Suppliers of top quality strain gauge sensors and transducers to every corner of industry - UK and worldwide
- Over 100 years of expert transducer knowledge
- Our high quality products all come with a 3 year warranty
Strain Gauge Displacement Sensor | Linear Position Sensor | AML/SGD
0-5mm to 0-100mm