Pressure Meter | Digital Pressure Switch | 4-Digit LED | DS201

Accurate pressure meter with display

  • Lead Time: 4-5 weeks
  • Buy online:
    Buy Online
DS201 Pressure Meter

At a Glance

  • Ranges: 0-400mbar up to 0-600bar
  • Outputs: 0-10 Volts / 4-20mA
  • Environmental Protection: IP65
  • Accuracy: <±0.5%/FSO
  • 4 Digit LED Display
  • Ideal for Easy On-Site Monitoring and Control
  • PNP Contact & Rotatable 4 Digit LED Display
  • Fast Setup with Custom Process Connections
  • IP65 Waterproof & Dust Tight Protection
  • Flush Pressure Ports Available for Viscous / Polluted Media
  • Intrinsically Safe Versions Available


The DS201 pressure meter uses a pressure switch with a 4 digit LED display providing a local digital readout of the measured pressure.

As standard, the DS201 pressure meter features 1 PNP contact and a rotatable display for easy reading in awkward installations. 2 independent and 4 independent PNP contacts can be offered, which are freely configurable.

A wide variety of electrical connections and mechanical connections are available, including flush pressure ports for pressure measuring in highly polluted, viscous and pasty media.

IS-versions EX is intrinsically safe versions of this pressure meter for use in hazardous environments can also be offered.

We are able to customise the DS201 pressure meter to suit your exact requirements if necessary whilst ensuring a minimal effect on price and availability.

Need a battery-powered pressure sensor with display? See our Baroli-02 battery-powered pressure sensor.

Technical Specifications

Input Pressure Range 1
Nominal pressure gauge [bar]-1...00.40.611.62.5461016254060100160250400600
Nominal pressure abs. [bar]--0.611.62.5461016254060100160250400600
Level gauge [mH2O]-461016254060100160250400600-----
Overpressure [bar]4122441010204040100100200400400600800
Burst pressure ≥ [bar]7244551212255050120120250500500650880
Vacuum resistancepN ≥ 1 bar: unlimited vacuum resistance
pN < 1 bar: on request
1 PVDF pressure port possible for nominal pressure ranges up to 60 bar
Contact 2
Standard1 PNP contact
Options2 independent PNP contacts
4 independent PNP contacts (possible with M12x1, 8-pin for 4-20mA/3-wire;
0-10V/3-wire on request)
Max. switching current4-20mA / 2 and 3 wire: contact rating 125mA, short-circuit resistant;Vswitch = Vs - 2V
0-10V / 3-wire: contact rating 125mA, short-circuit resistant
Accuracy of contacts 3≤ ± 0.5% FSO
Repeatability≤ ± 0.2% FSO
Switching frequencymax. 10Hz
Switching cycles>100 x 106
Delay time0-100 sec
2max. 1 contact for 2-wire current signal with plug ISO 4400 as well as 2-wire current signal with IS-protection
No contact possible with 3-wire in combination with plug ISO 4400.
Analogue Output (optionally) / Supply
2-wire current signal4-20mA / Vs = 13-36Vdc
permissible load: Rmax = [(Vs - Vs min / 0.02 A] Ω response time: <10 msec
2-wire current signal with IS-protection4-20 mA / VS = 15-28 Vdc
permissible load: Rmax = [(VS – VS min) / 0.02 A] Ω response time: < 10 msec
3-wire current signal4-20 mA / VS = 19-30 Vdc adjustable (turn-down of span 1:5) 4
permissible load: Rmax = 500 Ω response time: < 0.5 sec
3-wire voltage signal0-10 V / VS = 15-36 Vdc
permissible load: Rmin = 10 kΩ response time: < 3 msec
Without analogue outputVS = 15-36 Vdc
Accuracy 3≤ ± 0.5% FSO
3 accuracy according to IEC 60770 – limit point adjustment (non-linearity, hysteresis, repeatability)
4 with turn-down of span the analogue signal is adjusted automatically to the new measuring range
Thermal effects (Offset and Span) / Permissible temperatures
Thermal error≤ ± 0.2 % FSO / 10 K
In compensated range-25-85 °C
Permissible temperatures 5medium: -40 ... 125 °C electronics / environment: -40 ... 85 °C
storage: -40 ... 100 °C
5 for pressure port in PVDF the medium temperature is -30 … 60 °C
Electrical Protection
Short-circuit protectionpermanent
Reverse polarity protectionno damage, but also no function
Electromagnetic compatibilityemission and immunity according to EN 61326
Mechanical stability
Vibration10 g RMS (25 ... 2000 Hz) according to DIN EN 60068-2-6
Shock500 g / 1 msec according to DIN EN 60068-2-27
Pressure port / housingstandard = stainless steel 1.4404
option for G1/2" open port (up to 60 bar): pressure port: PVDF; housing: stainless steel 1.4404
options for G3/4" flush (0.6 bar ≤ pn ≤ 25 bar): pressure port: PVDF; housing: PVDF
Display housingPA6.6, polycarbonate
Seals (media wetted)standard: FKM
option: EPDM (pn ≤ 160bar)
others on request
Diaphragmceramics Al2O3 96%
Media wetted partspressure port, seals, diaphragm
Explosion protection (only for 4 … 20 mA / 2-wire)
Approval AX14-DS 201IBExU 06 ATEX 1050 X
zone 1: II 2G Ex ia IIC T4 Gb (connector) / II 2G Ex ia IIB T4 Gb (cable)
Safety tech. maximum valuesUi = 28 V, Ii = 93 mA, Pi = 660 mW, C ≈ 0 nF, Li ≈ 0 µH
Max. switching current 670 mA
Permissible temperatures for
-25 ... 70 °C
Connecting cables (by factory)cable capacitance: signal line/shield also signal line/signal line: 100 pF/m cable inductance: signal line/shield also signal line/signal line: 1 µH/m
6 the real switching current in the application depends on the power supply unit
Display4-digit, red 7-segment-LED display, digit height 7 mm, range of indication -1999 ... +9999; accuracy 0.1 % ± 1 digit; digital damping 0.3 … 30 sec (programmable);
measured value update 0.0 … 10 sec (programmable)
Option oxygen application 7for pN ≤ 25 bar: O-ring in FKM Vi 567 (with BAM-approval); permissible maximum values are 25 bar / 150° C
Current consumption (without contacts)2-wire signal output current: max. 25 mA
3-wire signal output current: approx. 45 mA + signal current 3-wire signal output voltage: approx. 45 mA
Ingress protectionIP 65
Installation positionany
Weightapprox. 200g
Operational life100 million load cycles
CE-conformityEMC Directive: 2014/30/EU Pressure Equipment Directive: 2014/68/EU (module A) 8
ATEX Directive2014/34/EU
7 not possible with flush pressure ports
8 this directive is only valid for devices with maximum permissible overpressure > 200 bar
Electrical connectionM12x1 plastic (5-pin)M12x1
metal (5-pin)
M12x1 plastic (8-pin)ISO 4400Binder
series 723 (5-pin)
cable colours (IEC 60757)
Supply +11111WH (white)
Supply -33323BN (brown)
Signal + (only 3-wire)22232GN (green)
Contact 144434GY (grey)
Contact 2555-5PK (pink)
Contact 3--6---
Contact 4--7---
Shieldvia pressure
plug housing/
pressure port
via pressure
plug housing/
pressure port

Product Dimensions mm

DS201 Pressure Meter outline drawing
ds201 pressure meter outline drawing G1/2" DIN
DS201 pressure meter connection outlines
ds201 pressure meter flush connection outline
ds201 pressure meter cable outlet drawings
Electrical Connections mm